Compact driver placement and quality, system specific crossovers assure a wide uniform dispersion for complete coverage of a listening room. Unpacking the System Carefully unpack the system. Keep the shipping carton and packing materials for future use.
The speakers are configured for tabletop use when you first unpack the system. The foot installed on the rear of the speaker will keep it upright. The MCS satellites and center channel are designed to easily mount on the wall using the keyhole slot s on the back of the speaker. When mounting the speakers to the wall use the supplied rubber bumpers. You must remove the attached foot to wall-mount your speakers. Remove the thumbscrew from the back of the foot.
It is slotted for easy removal with a screwdriver or a coin. The keyhole mounting option is similar to hanging a picture frame on a wall. Install a 8 screw not included into the sheetrock, making sure to go into a stud, and hang the speaker onto the screw head. If a stud is not available, a sheetrock anchor should be used to support the weight of the speaker. It is advisable to connect the speaker wire prior to wall-mounting.
NOTE: Because there are so many different kinds of surfaces on which the speakers could be mounted. There is no one type of fastener that we could supply that would work in all the possible situations. So taking into account the surface the speaker is being mounted on, acquire the appropriate type of fasteners.
Keep in mind the weight of the speaker. Speaker Connections After your speakers are properly placed, you are ready to wire your system. First, turn off all system power. Use the speaker wire included with the system to make your connections. For longer distances, 16 or 18 gauge wire available from your dealer should be used. Please see the illustration for guidance connecting the wires to the MCS satellites and center channel. To ensure the best performance observe polarities when making speaker connections, as shown in the illustration.
Connect the — black terminals in the same way. If the connections are not made correctly it can cause poor bass response and imaging. Also, to avoid short circuits that may damage your equipment be careful not to let any of the bare wires touch each other.
Subwoofer Connections Turn off all power. Use the subwoofer cable included with your system to connect the subwoofer to your receivers Subwoofer or LFE Output. We do not recommend using use the outlets on the back of the receiver.
An LED indicator next to the volume control indicates what mode the subwoofer is in. The subwoofer will then power ON instantly when a signal is detected. Further adjust the Subwoofer Volume Control until you hear a match in volume between the main speakers and subwoofer. Ideally, bass response should not overpower the room but rather be adjusted so there is a natural blend across the entire musical range. If your receiver has adjustable crossover settings, we recommend the subwoofer crossover be set at Hz.
Maintenance and Service The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust. All wiring connections should be inspected and cleaned or remade at least once a year.
If a problem does occur, make sure that all connections are properly made, secure and clean. If a problem occurs in one loudspeaker, rewire that speaker in a different location within the system. Should the problem persist in this speaker the problem is within the speaker. If the speaker sounds fine in the new position it is a strong indication of a more in depth issue with the electronics in the system.
In the event that your MCS ever needs service, contact your local Boston Acoustics dealer or visit www. Limited Warranty Boston Acoustics warrants to the original purchaser of our MCS system that it will be free of defects in materials and workmanship in its mechanical parts for a period of 5 years from the date of purchase. The warranty period for the electrical components of MCS is 1 year. Your responsibilities are to install and use them according to the instructions supplied, to provide safe and secure transportation to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip when requesting service.
This warranty is limited to the Boston Acoustics product and does not cover damage to any associated equipment. This warranty does not cover the cost of removal or reinstallation. This warranty is void if the serial number has been removed or defaced. Quick Links. Table of Contents. Previous Page. Next Page. High performance 6,5-inch component speaker system 7 pages. To reduce the risk of re or electric indicates hazards arising from danger- shock, do not expose this apparatus to rain or ous voltages.
This symbol found on the apparatus This symbol found on the apparatus indi- indicates the user should read all safety cates that the apparatus must be placed in a These speakers incorporate high-quality components that produce the famous Boston sound.
The system is ideally suited for use as a 5. The system is complete with everything you need for the typical speaker system including speaker wire, satellite speakers, a center channel speaker, and a subwoofer.
The speakers are configured for tabletop use when you first unpack the system. The foot installed on the rear of the speaker will keep it upright.
The MCS 90 satellites and center channel are designed to easily mount on the wall using the keyhole slot s on the back of the speaker.
Page 5: Subwoofer Controls If the speaker sounds fine in the new position it is a strong indication of a more in depth issue with the electronics in the system. In the event that your MCS 90 ever needs service, contact your local Boston Acoustics dealer or visit www.
0コメント